• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Conflict Between MPEG-2 Card and 7600GT - Freezes on Windows Boot

I am in the process of migrating my home machine which functions as a
general home computer and a PVR as well, but have run into serious
problems with an apparent conflict between the Hauppauge PVR-150MCE and
my Nvidia 7600GT.

System:
AMD X2 3800+
Gigabyte GA-M55plus-S3G motherboard
Gigabyte Nvidia 7600GT Silentpipe (91.47)
WD 4000GB
2GB RAM
Audigy 2 ZS Soundblaster
Seasonic S12-380 power

Symptoms:
When both 7600GT and PVR-150MCE are installed the boot process stalls at
the Windows screen and never advances.

Attempted:
Works fine with everything BUT the PVR-150
Hangs with everything pulled but the PVR-150 and video
Tried different PCI slots (1 and 4) - still hangs

I am a bit at a loss of what to do here.

I wrote Hauppague tech support and they responded with:

There might not be enough resources available. See if it's possible to
reduce the amount of memory the video card uses through the Bios. Customers
have stated this method has helped when it comes to lock up or not enough
resources in a machine.

What the heck does this mean?!!?

Any help would be greatly appreciated.
 
Have you gone into your BIOS and disable everything you dont need like serial and parallel ports and onboard sound and midi. Thats where I would start. Also I am assuming your power supply is able to provide enough power for all the devices your using
 
Originally posted by: brokejumper
There might not be enough resources available. See if it's possible to
reduce the amount of memory the video card uses through the Bios. Customers
have stated this method has helped when it comes to lock up or not enough
resources in a machine.

What the heck does this mean?!!?

One of the following:

1. They didn't read your request properly, assumed you were using onboard shared memory graphics, and asked you to reduce this shard memory.

or

2. They want you to reduce your 'AGP aperture' or the PCI-E equivelant (if it exists) to about 64 or 128MB.

 
Back
Top