Configure Zone Alarm Free Edition for LAN

[morulis]

I have made a little LAN (two computers that are connected directly via UTP cable).
I use ICS which helps me share my inject printer,my dial-up connection and my files. The ICS Wizard has made all the configuration for me (has also configured the Windows Firewall). But when I tried to use the free edition of Zone Alarm this didn't permit my computers to connect each other the Internet Connection Sharing could not be established. I saw that Zone Alarm has some Zones but I didn't understand how to use them in order to allow ICS. PLEASE HELP ME!!!:brokenheart:

 

[rschwab]

I had that same problem with it. I found out that you can take the pc that you want to share with and add that in to the Zone alarm. I am not currently at my pc, i am at work. But right click on the zone alarm icon in the tray and open it up. You can added the other pc's ip address as a trusted ip. I forget were the setting is. Good luck. THis worked for me.

 

[JackMDS]

This is not for Zone Alarm but it would help to understand how to get to it.

http://www.ezlan.net/faq#trusted

:sun: