Ok so today I decied to pull out my GPU to clean the cooler. Removed it and blew the dust out then put it back in. Now the computer wont boot, all the fans spin up and i can hear my HDDs spin up but the monitor stays black with the power light flickering and i get no beeps (I would assume if somehow i damaged the gpu the computer would atleast give a POST beep).
I tried booting with no GPU, no RAM, no HDDs and still no beeps.
Tried clearing the CMOS as well but to no avail.
Out of desperation I even tried a different PSU but that didn't help either so now I'm at a loss here.
Specs are :
E6600 C2D (Conroe)
Gigabyte GA41M-Combo board
2x2GB of some generic ddr3
Gigabyte HD4870 1GB
2 1TB caviar blacks
Seasonic X750 PSU
C2D
I tried booting with no GPU, no RAM, no HDDs and still no beeps.
Tried clearing the CMOS as well but to no avail.
Out of desperation I even tried a different PSU but that didn't help either so now I'm at a loss here.
Specs are :
E6600 C2D (Conroe)
Gigabyte GA41M-Combo board
2x2GB of some generic ddr3
Gigabyte HD4870 1GB
2 1TB caviar blacks
Seasonic X750 PSU
C2D