Greetings,
I decided to build a computer by myself. Here is my hardware:
Graphics card:
GeForce GT 440 / PCI-E 2.0 / 1GB GDDR3 / 128-bit
Motherboard:
Gigabyte GA-965P-DS3
HDD :
WD CAVIAR SE16 320GB SATA2 16MB
Power Supply:
ATX 500W 12 cm
DVD-RW:
SMG DVDRW 22X SATA
Processor:
Intel® Core™2 Extreme Quad-Core / Core™2 Duo
So I have put all together and tried to turn it on, so I have 2 problems:
1. It is not turning from first time, I have to press it 4, sometimes 6 times and it is turning on.
2. When computer is turning on, all fans are spinning (case fan, psu fan, gpu fan), so it seems to work ok, but I have no display on my monitor.
I have plugged in monitor, I'm sure. I calculated that 500W is enough for my hardware. Tried to reinstall RAM. Tried to reset CMOS (by unplugging bios battery for 10 or 20 minutes.
If you will need some more details or more pictures just ask.
Sorry for my bad english.
Thank you very much for you help and your time 😉
Video:
http://www.youtube.com/watch?v=GXdmeKvx624
I decided to build a computer by myself. Here is my hardware:
Graphics card:
GeForce GT 440 / PCI-E 2.0 / 1GB GDDR3 / 128-bit
Motherboard:
Gigabyte GA-965P-DS3
HDD :
WD CAVIAR SE16 320GB SATA2 16MB
Power Supply:
ATX 500W 12 cm
DVD-RW:
SMG DVDRW 22X SATA
Processor:
Intel® Core™2 Extreme Quad-Core / Core™2 Duo
So I have put all together and tried to turn it on, so I have 2 problems:
1. It is not turning from first time, I have to press it 4, sometimes 6 times and it is turning on.
2. When computer is turning on, all fans are spinning (case fan, psu fan, gpu fan), so it seems to work ok, but I have no display on my monitor.
I have plugged in monitor, I'm sure. I calculated that 500W is enough for my hardware. Tried to reinstall RAM. Tried to reset CMOS (by unplugging bios battery for 10 or 20 minutes.
If you will need some more details or more pictures just ask.
Sorry for my bad english.
Thank you very much for you help and your time 😉
Video:
http://www.youtube.com/watch?v=GXdmeKvx624
Last edited:
