I have a question for all the guru's here. Anyway, yesterdat while scanning my computer for viruses using Norton AV 2005, my computer crashed to a BSOD. The error that I got was 0x00000077 KERNEL_STACK_INPAGE_ERROR. The details are as follows:
parameter1 c0000185, parameter2 c0000185, parameter3 00000000, parameter4 014bf000.
I do not know what is causing this error. I tested my RAM with Memtest86, and my hard drives seem ok, cause I can access them just fine. My computer has been running flawlessly besides this. If anyone has any experience with this error, let me know. I read that with the parameter 2 listed, that it is a SCSI cabling or termination error, but my drives are SATA. Anyway, here are my specs:
AMD 3500+ 130nm
Asus A8V Deluxe
XFX GeForce 6800GT
Kingston RAM 3-3-3-8
Maxtor 60GB SATA
Maxtor 200GB SATA
Audigy 2 ZS
475W Enermax PS
I have both drives connected to the onboard VIA RAID controller on the mobo, running in a non-raid setup. If anyone has any help, or needs more info, please let me know. Thanks.
parameter1 c0000185, parameter2 c0000185, parameter3 00000000, parameter4 014bf000.
I do not know what is causing this error. I tested my RAM with Memtest86, and my hard drives seem ok, cause I can access them just fine. My computer has been running flawlessly besides this. If anyone has any experience with this error, let me know. I read that with the parameter 2 listed, that it is a SCSI cabling or termination error, but my drives are SATA. Anyway, here are my specs:
AMD 3500+ 130nm
Asus A8V Deluxe
XFX GeForce 6800GT
Kingston RAM 3-3-3-8
Maxtor 60GB SATA
Maxtor 200GB SATA
Audigy 2 ZS
475W Enermax PS
I have both drives connected to the onboard VIA RAID controller on the mobo, running in a non-raid setup. If anyone has any help, or needs more info, please let me know. Thanks.
Facebook
Twitter