cold boot problem with a7v133???

[kimber]

ok just got buddys new system going
a7v133,tbird 750,pep66 delta,micron pc133 case 2
well first thing i connected L1's and booted at stock speed.everything fine so decided to start pushing it.restart,started changing multi's to see how high i could go.got all the way to 9.5 no problems but wouldn't boot at 10x100.so i got cocky and tried 7.5x133,no go.tried 7x133 bam 933 .stuck in u.t. and played for about 20 mins. then it locked. restart,went into bios raised vcore to 1.85 and tried again.played ut for about 1 hr. till i got tired of playing. quite game and ck'd temps 32 mb,42 cpu. then decided to shut down and try cold boot(ala cusl2-c).thats when it all went bad the highest i can get it to cold boot is 8.5x100.once into windows,restart and back up to 7x133 no problem.
well i guess my question is if i connect L7's to bump up default voltage do you think i'll also end up changing L6's for a value of 7 or should the L7's get me tru cold boot?(or will it try to boot at 7.5x133)and if i do connect L6's will i loose adjustment of multi in bios?
one more quick thing.has anyone ever tried using jumpers instead of jumper free to see if it would over ride defaults at cold boot?

 

[kimber]

also whats the best way to get artic silver off the die?the stuff seems to really like sticking to the die compares to the intels.

 

[lotust]

ok you BIOS settings will not hold right?


I have the A7V with the same problem. Get this $hit. you gotta set the jumpers All them . thats why it will not hold the BIOS setting with the Voltage.


I think thats your problem. AT least that was mine

 

[kimber]

if thats true that would be great.i haven't tried it yet but as i stated in previouse post i think it may work.

 

[Bartman39]

Yep set the voltage jumpers to 1.85 and rock!!! Also get some CRC brand "Contact Cleaner" and use a clean cloth to get the AS off (dont spray it directly on the cpu its COLD stuff...)

 

[kimber]

hanever thought of contact cleaner.i think i have some on my shelfs at work.its a marine brand but dont see why it shouldn't be ok.
thanx

 

[kimber]

update:
used jumpers and dips instead of jumperfree and booted fine.
now running 7x133@1.85.stable playing hours on lan.max temp 47c.would not boot at 1.8v.
will try 7.5x133 soon and post results.

 

[lotust]

so I helped. Its good to see I like to give something back

 

[kimber]

tried 7.5x133 last night.worked desktop and general apps fine but locked up after alittle while of gaming.not for sure if alittle more tweaking will stable up, but happy with 7x133.not bad for a 75 dollar chip. probably could also up fsb alittle more but like i said were happy with wear its at and dont want to run memory out of spec to far causing use to lower case settings.timw to get some case fans and close her up.