• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

CMOS Battery

littletemple

Golden Member
I was wondering what battery I should replace with my "dead" battery on my ecs k7s5a board? I heard the panasonic cr2032 is good, but what type because on radioshack.com, it lists a variety of types. 2-pin, 3-pin, vertical, horizontal?????Any suggestions on how to replace the battery because I've never done it before?
 
the panasonic cr2032 is a flat round lithium battery about the size of a quarter and twice as thick(i'm pretty sure it is). used for camera's, calculators and such... can be found just about anywhere. Look on your motherboard... should be easy to spot.
 


<< I was wondering what battery I should replace with my "dead" battery on my ecs k7s5a board? I heard the panasonic cr2032 is good, but what type because on radioshack.com, it lists a variety of types. 2-pin, 3-pin, vertical, horizontal?????Any suggestions on how to replace the battery because I've never done it before? >>



Funny you should mention this, because I just replaced the battery on my K7S5A about ten minutes ago. I had one "checksum error" in 2 months, but decided to make the change anyway.

cr2032 is, nowadays, a battery type. I just went to the RadioShack store and said, "I want a cr2032 lithium battery." Cost was <$3. He sold me a Radio Shack brand battery, which for all I know, could be a Panasonic.

I unplugged the system, stuck it on an antistatic mat, started the humidifier, put on my wrist strap, and used a small flat-blade screwdriver to pop out the battery. While I was at it, I pulled up the bottom leaf metal contact a little, to ensure electrical contact. Then I slid the battery in under the front metal clip, and pushed down the back end with a slightly creepy amount of force, and the battery popped in. Since the system has nvram, I didn't even have to reset the BIOS.

The clip that holds the battery is said to be fragile (in that one or more people have reported breaking the clip free). But, a lot of things on the motherboard are fragile.
 
Back
Top