• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Centurion 5 / 9NPA+ Ultra Question

A

auveeb

Member
Hey,

This is my first setup attempt ever and I'm having a little trouble with the wiring. I've got everything hooked up except for the front wires (reset/power).

Here's the deal:

The case comes with the following wires on the front:
HDD LED (White/Orange wire)
+ and - (White/Green wire) These both also have a little metal thing on the back (inside)
ResetSW (Gray/Gray wire)
PowerSW (White/Blue wire)

On the MOBO, the connectors are labeled, and look like this:
http://exoload.com//106/1136513191.jpg

Now, once I put the HDD LED and Reset SW in their positions, the connectors left are PowerSW and + and -. I went ahead and assumed that PowerSW went in PW_ON because it was a 2 pin connector. The only things left are the - and the +. Do I just leave those, or what? I tried starting w/o them and nothing would happen. Any suggestions?

Thanks!
 
according to the manual, you have 4 cables- power switch, power led, reset switch and hdd led
Manual
So, the 2 wires you have left should be pwr_led, but that wouldn't stop it from booting.
 
When you say it wont turn on what are we talking about here.....no power at all? brief flash of power? power but not boot screen?

Oh and I found the Epox board can be finicky if the plugs are not plugged in the right way, did you try rotating them? I know it sounds crazy but it was the only way to get it to work for me
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top