Celeron 1.3 overclock

[Bill Kunert]

Is it reasonable to expect a 1.3GHz celeron to run on a 133MHz bus? I just ordered one and it will be on a MSI 694T Pro that I modified to recognize a 100MHz bus cpu as a 133MHz bus cpu. I'll have bus speed adjustments from 133MHz to 160MHz in 1 MHz steps. Also, what is the default voltage for the .13 micron processors? With the 700MHz PIII I'm currently running at 1.01GHz the lowest voltage I can set is 1.625 volts.
Thanks
Bill

 

[techwanabe]

That looks pretty iffy. Oldfart recommended the 1.0A or the 1.1A for overclocking because you were most likely to hit 133 FSB or higher with these Tualy's. The faster Tualy's generally won't hit 133 FSB... but you can always try. May the later parts are clocking better...

 

[BurninUp]

http://www.cpudatabase.com/CPUdb/

looks like 1550-1600 is a good overclock on these - although a couple got 1740 on air. 133 x 13 = 1729
133 x 11= 1463