Cel 600 o/c 1008Mhz

[Wixer]

Tested 5 units Cel600 SL4NX.3 reached 900Mhz,2 reached 1008Mhz(112FSB).All at default voltage.Used Gigabyte 6VX7-4X with 2x64meg PC133 Kingston ValueRam.

Chas

 

[krazynammer]

Celeron 600@1008 at default voltage? That's unheard of. What kind of cooling do you use?
I'd love to have my hands on one of those chips.

 

[Cable]

haha, so would i.

 

[aknuj]

wixer what type of board u have? socket or slot1Text

 

[vvvvvv]

defauslt voltage my ass

 

[Wixer]

Sorry,
Let me rephrase that:
Gigabyte 6VXE7+.Bios does not have a CPU voltage adjust but there is a 'magic' jumper on the m/board that increases CPU voltage by 10%.I left that jumper at 'default' position.
I've tested another 2 Cel600 same spec(SL4NX) and both ran fine at 900Mhz at 'default' voltage on the same m/board for 18 hours looping 3DMark2000 ver1.1
The intention of this post is to share with fellow forum members that this Celeron spec can reach a certain speed and i did not anticipated to get flamed.I also do not expect 'flamers' to take this figure as proof.I'm surprise the system ran very stable in a tropic enviroment with room temps hovering at 30deg Celcius.All test were conducted using Gold Orb and Alpha FC-PAL35 h/sinks.This will also be my last post for this subject.

Rgds,
Chas

 

[soundsation]

SL4NX is cC0 stepping, default voltage on this celeron is 1.7 volt !!!!
Most of these baby will run at 1 GHz

 

[Wixer]

Soundstation.. 🙂 Thnx

Chas