CD burner issues! Help Please

[Frontrunner]

I havent burned a CD in months and I need to back my stuff up. I have a HP Cd-Writer Plus and When I try to burn a cd it coems out with an error by Output Device. While it is trying to burn before it pops up with an error there is 0% buffer. The errors are: T0100: I/O error (03/0C/00) - Write error
T0100: I/O error (06/C5/00) - Write error - buffer underrun occurred
T7118: TrackWriter error - Command retry failed Can anyone tell me whats going on? Thanks.

 

[ThatDumbGuy]

Ensure that you are running no other programs when you burn a CD... it looks like you don't have a Burn-Proof (buffer underrun prevention) Drive.

 

[4824guy]

Run a defrag on your HD that had the data on it and try reducing the burn speed to see if that helps any.

 

[WHipLAsh13]

Try stepping down the speeds you are burning at also if you are trying to back up a cd have it write it to the hard drive first.

 

[Trader05]

Check your aspi drivers, you can download them and a check program @ Fireburner.com under downloads

 

[arcenite]

sounds like there may even be a problem with the hardware, the way it's connected or something

 

[Frontrunner]

Well I have used a backpack burner too through my printer port. So its not the burner itself. I have a Ghz computer and the burner maxes out at 4x. I have tried every speed. Although I only have 3 choices. The external burner came out with the same errors. I have installed Windows again already. I switched out cables to the hard drive and the cd-writer but same ole same ole.