• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

CAT5e LAN cable differences

thespeakerbox

thespeakerbox

Platinum Member
I need to know whether I can stranded or solid so i can buy some connectors.

All i see on the box is Cat5e MPR/CMR Riser Rated 4 pair /24 gauge

Any way to find out?
 
Riser cable is solid conductor. It's considered "in-wall" cabling, which will always be solid conductor.

Stranded is for jumpers only, and is bad for long runs because it has much more loss and lower stats in the transmission characterisitics (because, by spec, jumpers will never be longer than five meters (~15 feet)).

Buy (Cat5e-rated) solid-conductor style RJs.

Good Luck

Scott
 
Solid for long run and in wall installations.

Stranded to make short patch cables (about 15' max.).

Opps! seems that Scott and I posted within 1 minute.😱
 
Solid core wire is much stiffer than stranded. Do you have a spare patch cord lying around? Patch cords are stranded so bend them and compare. Of course, I have never seen riser rated stranded cable spools. I would suspect it is solid core.
 
Cat5e MPR/CMR Riser Rated 4 pair /24 gauge
Click to expand...
That's solid wire. Use that for permanent runs to keystone jacks or patch panels.
If you value your time I suggest you purchase premade stranded patch cables. The cheapest ones you can find are still better than home made ones with solid cable and crimped connectors.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top