Hi, I got a 5850 Sapphire Xtreme and I asked several times in the forum about if setting up my voltages would be safe and I decided to do it since I can get 900/1200 @ 1.095.
Okay I downloaded GPU-z/RBE/ATIWinflash and I extracted my bios with GPUz and with RBE I edited it chaging just the voltage value from the Clock Info 00, then I used ATIWinflash to flash my bios, all nice, my vbios was installed succesfully, I restart the PC and heres the issue, the card is still working at 1.088, the voltage doesn't change it and all... and I even tried flashing since DOS and nothing worked :\
I've downloaded different bios (ASUS Bios, old Sapphire bios) but the program says that "ID's doesn't match" or something like that...
Also, with RBE I can edit the values from the box "GPU Registers" but in my own bios this box is locked so I can't edit it, any ideas?
Okay I downloaded GPU-z/RBE/ATIWinflash and I extracted my bios with GPUz and with RBE I edited it chaging just the voltage value from the Clock Info 00, then I used ATIWinflash to flash my bios, all nice, my vbios was installed succesfully, I restart the PC and heres the issue, the card is still working at 1.088, the voltage doesn't change it and all... and I even tried flashing since DOS and nothing worked :\
I've downloaded different bios (ASUS Bios, old Sapphire bios) but the program says that "ID's doesn't match" or something like that...
Also, with RBE I can edit the values from the box "GPU Registers" but in my own bios this box is locked so I can't edit it, any ideas?
Facebook
Twitter