Okay here's the deal. I've spent a god awful amount of time putting this thing together trying to get it to boot. I finally figure it out was either the old NIC card or the jumper settings. It could never boot with the auto-detect settings. The RAM is Kingston ValueRAM 184 Pin 256MB DDR PC-3200, I think it has something to do with that.
But here's the deal, it will ONLY boot with the jumpers set to 200 (400mhz) FSB. I tried setting the RAM to 166 and booting with 166 but that didn't work either. I really need some help here.
Spects: Barton 2500+ RETAIL
Kingston ValueRAM 184 Pin 256MB DDR PC-3200
Thermaltake Silent PurePower, 420W ATX power supply.UL, CSA, TUV, CE Approved. Intel Pentium 4 Compliant
CHAINTECH "SKT600" KT600 Chipset Motherboard for AMD Socket A CPU -RETAIL
But here's the deal, it will ONLY boot with the jumpers set to 200 (400mhz) FSB. I tried setting the RAM to 166 and booting with 166 but that didn't work either. I really need some help here.
Spects: Barton 2500+ RETAIL
Kingston ValueRAM 184 Pin 256MB DDR PC-3200
Thermaltake Silent PurePower, 420W ATX power supply.UL, CSA, TUV, CE Approved. Intel Pentium 4 Compliant
CHAINTECH "SKT600" KT600 Chipset Motherboard for AMD Socket A CPU -RETAIL
Facebook
Twitter