• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Can cpu overclocking cause corruption on my hard drives?

T

TmBlackFlag

Senior member
Hi there, i have a seagate barracuda 250gb. The trouble i have is, after a few days of a fresh install on the HD I get an error on bootup saying:

"Windows could not start because the following file is missing or corrupt
\Windows\System32\Config\System"

Then it says i can attempt to repair but it doesn't work. I have ran ALL Seatools utilities to check for bad sectors and such and all tell me the drive is fine.

So anyways, i recently upgraded my mobo/cpu/video card and moved this hard drive over to a new system with a fresh install i did 3 days ago. I was having the same corruption problem before with this hard drive on my old setup.

Sure enough right now it crashes on me during bootup. By conincidence it happens while I was trying to raise the multiplier on my fx-55. Mind you i had it running at 2.8 OC stable up until today but tried pushing it a bit more.

So my question is, do you think this hard drive is just bad or does OCing somehow corrupt these files? I'm tired of having to reload windows and am about to run to fry's right now for a hard drive.
 
yes it can cause corruption, you need to lock the PCI bus bus at 33mhz, most IDE/SATA contollers don't like being pushed any faster.
 
its a SATA hard drive. I'll check the BIOS settings.

Also, with that said when performing an overclock and really trying to see how far your system can go, do you want to do this all pre OS? Cause this has happened to me quite a bit
 
or better yet does locking the IDE/SATA controller as you mentioned resolve the corruption problem?

Also in my bios there is a "PCI clock sync mode" that i set to 33.33MHz. Is that the setting i want?
 
I have an fx-55 and the ram settings are stock. I have only been OCing by raising the cpu multiplier and voltage.

Although on the last reboot before the corruption i switched from 2t to 1t on the memory. I have corsair xms ram 2x512mb
 
Blah! now when trying to boot off my XP SP2 CD and reinstall i am getting a BSOD as it is loading all the stuff in the beginning. Error says

"Bad Pool Caller"
 
Don't ever install/try to install your operating system while overclocked. And if you've got an SATA hard drive, locking your PCI bus isn't going to affect your hard drive in any way.
 
Originally posted by: myocardia
Don't ever install/try to install your operating system while overclocked. And if you've got an SATA hard drive, locking your PCI bus isn't going to affect your hard drive in any way.
Click to expand...

why not?

I do it all the time on my systems and never had any data corrutpion or any other problems.
 
Originally posted by: TmBlackFlag
I have an fx-55 and the ram settings are stock. I have only been OCing by raising the cpu multiplier and voltage.

Although on the last reboot before the corruption i switched from 2t to 1t on the memory. I have corsair xms ram 2x512mb
Click to expand...

that could be your problem....try setting it back to 2T and see if you can run windows
 
2T is working and i am repairing windows atm. I just thought my corsair xms memory could hit 1t no problem.


also as posted above is this true? "locking your PCI bus isn't going to affect your hard drive in any way. "

I want to get back to trying to push this fx-55 to 3ghz without any other hard drive problems. I'm overclocking strictly by raising the multiplier and not touching the memory.
 
Originally posted by: myocardia
Originally posted by: Stumps
why not? I do it all the time on my systems and never had any data corrutpion or any other problems.
Click to expand...

On an unproven overclock?
Click to expand...

well thats a different matter...but I ALWAYS make sure that my overclocks are 100% before doing anything "normal" with my PC's

you should have put that in your post
 
Originally posted by: Stumps
well thats a different matter...but I ALWAYS make sure that my overclocks are 100% before doing anything "normal" with my PC's

you should have put that in your post
Click to expand...
You didn't realize that install & reinstall are two different things?😉
 
Only the nVidia SATA's can be locked. You need to research which SATA are the nVidia, on your board.

edit: And once you've found out, alot of times they have to be locked in the BIOS, before they become locked.
 
back in the day, higher pci speeds sometimes gave increased peformance. is that still true?

the only time i had a corrupt HD was at pci 37 or 38.
 
I agree with myocardia, why take a chance with an OS install with it being pushed
too close to it's limits. What's to gain really, a slightly faster install?? Also what brand
and rating of power supply are you useing? higher OC'S mean more power is needed.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top