OK, I tried this in the Mobo section, next stop is here. My P3 800 is running at 133 fsb, but,( the catch).... If I reboot, the machine just shuts down. No probs at 1008,( 126 fsb ), I had a similar prob a while back with the be6-2. All diff. components now tho, including the PS. Could it just be a bios Limitation on the board,(s), ?? System specs=
P3 800 Slot1 1.85v
Bxmaster with 5.5 bios ( Latest )
Geforce Clap oem 256ddr ( 3.5 I/O voltage )
Promise ata 100 Controller
Maxtor 40 gig plus
SBLive value,( with sb emu disabled)
Netgear fa311 Nic
USR Sportster Isa Modem.
2x 128 Rev.2 Mushkin in slots 1 and 3
Nothing on USB
Cpu temp taken off the Onboard Probe at 1.85v & 1069 = -5c
Now, before any 1 says anything, The Cpu is stable, I ran stability test overnite for the last 3 nights, with No errors. Also, I just finished( 3 days ago) running my P3 750 at 133 fsb, so I know All the components are fine with it. Any Input??
P3 800 Slot1 1.85v
Bxmaster with 5.5 bios ( Latest )
Geforce Clap oem 256ddr ( 3.5 I/O voltage )
Promise ata 100 Controller
Maxtor 40 gig plus
SBLive value,( with sb emu disabled)
Netgear fa311 Nic
USR Sportster Isa Modem.
2x 128 Rev.2 Mushkin in slots 1 and 3
Nothing on USB
Cpu temp taken off the Onboard Probe at 1.85v & 1069 = -5c
Now, before any 1 says anything, The Cpu is stable, I ran stability test overnite for the last 3 nights, with No errors. Also, I just finished( 3 days ago) running my P3 750 at 133 fsb, so I know All the components are fine with it. Any Input??
Facebook
Twitter