Bus Mastering HELP!!!

[Boricuamed]

I have aked this question on some other forums and nobody really seems to know, so here goes:

I have an Elsa Gladiac MX32Mb SDR that is supposed to be bus master capable. My question is: Where in Windows do I go to see if it is enabled/running in bus master mode?

Please, any kind of info is GREATLY appreciated!

I have all of the latest drivers, patches, BIOS, and other stuff installed.

System Config:
Duron 800@933 (133x7) MHz 1.65v
Asus a7v133 w/ v1004 BIOS
Micron 256Mb PC-133 CAS3 (but I configured it to CAS2 2-2-2)
Maxtor 20Gb HD ATA66-7200RPM
Elsa Gladiac MX 32Mb SDR
Shuttle 10x DVD
Phillips CDRW 4x4x24
3Com NIC
External ISDN modem
S.B. Live! MP3+

 

[AndyHui]

By definition, ALL AGP devices are bus mastering, since it is the ONLY device on the bus....(AGP is a port anyway, not a bus). It should be automatic and not something the end user needs to set. Don't worry about it.

 

[Boricuamed]

Thanks for the input! I was just woondering because i did not see a setting for this in Device Manager.

Thanx.