• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Burning process + Simulation both fail

N

nater

Diamond Member
I recently reformatted both of my computers and put on fresh installations of Windows XP. I am now unable to burn CD's in both computers. Previously both burners worked without a problem, so I am thinking it is not a problem with faulty drives. I've tried burning a bin/cue file as well as a plain music CD from mp3s, both without any luck. Like I said I'm using XP SP1, and I've tried Nero 6 and 5.5. Here's my log file (note: this pc has both ide and scsi devices, but this has never been a problem before; the other pc has just ide):

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6
Recorder: <YAMAHA CRW8424S> Version: 1.0d - HA 2 TA 3 - 6.3.1.6
Adapter driver: <adpu160m> HA 2
Drive buffer : 4096kB
Bus Type : default (0) -> SCSI, detected: SCSI
CD-ROM: <TOSHIBA CD-ROM XM-6401TA>Version: 1001 - HA 2 TA 2 - 6.3.1.6
Adapter driver: <adpu160m> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-34EVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 0 ID 1 DMA: On
DiskPeripheral : IBM DMVS18V 0250 adpu160m Port 2 ID 0 DMA: Off
DiskPeripheral : IBM DMVS18V 0250 adpu160m Port 2 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA CD-ROM XM-6401TA1001 adpu160m Port 2 ID 2 DMA: Off
CdRomPeripheral : YAMAHA CRW8424S 1.0d adpu160m Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA CD-ROM XM-6401TA F: CDRom0
YAMAHA CRW8424S G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 119MB (122596kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.5.2004
CueSheet
6:55:57 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

6:55:57 PM #2 Text 0 File Writer.cpp, Line 124
Writer YAMAHA CRW8424S running

6:55:57 PM #3 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

6:56:39 PM #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 336104 ( 74:43.29)

6:56:39 PM #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

6:56:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: YAMAHA CRW8424S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

6:56:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

6:56:39 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 336105 (336105) = #336105/74:41.30
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE1, 2352, config 0, wanted index0 0 blocks, length 336105 blocks [YAMAHA CRW8424S ]
--------------------------------------------------------------

6:56:39 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [YAMAHA CRW8424S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE1, 2352/0x00, FilePos 0 352800 790871760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
336105 | lead-out | 1 | 0x00 | 0x41

6:56:39 PM #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

6:56:39 PM #11 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

6:56:39 PM #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

6:56:39 PM #13 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 8x (1,200 KB/s)

6:56:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:56:39 PM #15 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

6:56:39 PM #16 Text 0 File Mmc.cpp, Line 15555
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 11 00 00 00 00
41 01 01 11 00 00 02 00
41 aa 01 14 00 4a 2b 1e

6:58:17 PM #17 Text 0 File Cdrdrv.cpp, Line 1289
18:58:17.100 - YAMAHA CRW8424S\H2 T3 : Queue again later

6:58:17 PM #18 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x03C30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x0A
CDB Data: 0x2A 0x00 0x00 0x00 0x8D 0x1E 0x00 0x00 0x1B 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x0A

6:58:17 PM #19 CDR -1135 File Writer.cpp, Line 304
Write error

6:58:17 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:58:17 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:58:17 PM #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

6:58:17 PM #23 Phase 34 File dlgbrnst.cpp, Line 1841
Simulation failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 5:00:00 AM
File 'Drivers\adpu160m.sys': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
Double-check that the IDE controllers are operating at UltraDMA mode rather than PIO mode. Also, if you did not yet do so, update your chipset drivers and update Nero, and see if that helps 🙂 If it's an Intel-based system and you installed Intel Application Accelerator, you may want to try with it uninstalled.

If problems persist, also post your specs to help us get the bigger picture of what your system is.
 
Both IDE controllers on both computers are in UltraDMD mode. I used the latest version of Nero on both, as well as 5.5, which previously worked fine. One machine is intel and the other is AMD. More detailed specs:

PC 1:
Intel 440BX2
P3 600e
Liteon 32x burner
80 gig WD
60 and 20 gig Maxtors

PC2:
Shuttle AK31
Tbird 1.4
Adaptec 29160 Scsi adapter
Yamaha 8x burner
2x IBM 18 gig 10k hard drives
200 gig WD
80 gig WD

Since I'm having the same problem on both computers, I would guess that it has something to do with something that is the same between the two systems. As you can see from the specs, that isn't much. I did use the same copy of XP for both systems, perhaps there is something in that installation that needs to be changed for it to work?
 
Unless you have two WinXP licenses, obviously you should not be using WinXP on two different systems. Pick one that you want to keep, and activate it with Microsoft, and see if that helps with the burning (doubtful, but what the heck).

Beyond that, you might want to fall back on Nero's tech support next. I had to do that when my InCD 3.x component of Nero 5.5 wouldn't work, and they gave me InCD 4 via a FTP download with no hassle after reviewing my situation. Good luck 🙂
 
Checked for firmware updates for your ATAPI drives? Tried burning at lower speed? Tried having it copy files to a HDD first instead of disc-at-once?
 
Originally posted by: DAPUNISHER
Checked for firmware updates for your ATAPI drives? Tried burning at lower speed? Tried having it copy files to a HDD first instead of disc-at-once?
Click to expand...


I have tried burning at lower speeds, and without luck. I haven't updated the firmware, but both burners worked without problem before I reformatted. I haven't tried copying files to the hard drive first, but that would only be a temporary fix even if it did work...
 
Was SP1 installed before when the burners worked properly? If not perhaps some issue was created by SP1 that a the latest firmware will resolve, always worth a shot. My opinion on if copying to the HDD works is, any solution is better than none and it's only temporary if you are too impatient to live with it 😉
 
Originally posted by: DAPUNISHER
Was SP1 installed before when the burners worked properly? If not perhaps some issue was created by SP1 that a the latest firmware will resolve, always worth a shot. My opinion on if copying to the HDD works is, any solution is better than none and it's only temporary if you are too impatient to live with it 😉
Click to expand...


I didn't think about the SP issue. I will check it out. Thanks
 
You must log in or register to reply here.
Back
Top