BURNING hot or normal?! (e6600 OC)

[yalag]

Right now here is the situation

cpu is e6600, cooler is zalman CNPS9500
stock voltage
OC to 3400
ram is 1G 800mhz

temp is follow:
easytune5/speedfan show as 67C under load
core temp show 75C under load
easytune5/speedfan show as 47C idle
core temp show 60C idle

Is this normal or did I screw up somewhere?

Thank you!

 

[lopri]

Can't be right.

 

[Roguestar]

Try removing the heatsink/fan, reapplying the thermal paste and reseating the heatsink and fan.

 

[Conky]

Did you remember to put thermal paste on the heatsink? 😛

Seriously, specs are needed... motherboard, bios, etc. Is the case properly vented? What does TAT say the temps are? etc...

 

[yalag]

forgot to mention system temp is 44, thank you.

What could be wrong tha the reseating could fix?

 

[yalag]

specs are
GIGABYTE GA-965P-S3
latest bios v6
I put on AS4
case has front and back fans, shouldnt be related because system temp is fine? or is it? 44c
what is TAT?

 

[yalag]

any help at all? what temp should it be then? at this speed?

 

[The-Noid]

44 is way to high. You should not see temps into the 40's on 965p. Try taking the side of the case off and see if it helps a bit. I would recommend reseating the heatsink just to make sure the temps on the cpu are right. I think you case is just very hot and that is causing the cpu to be hot though.

The other question is what is your ambient temperature?

 

[The I]

TAT is Intel Thermal Analysis tool. But in my experience it taps onto the same probe as core temp, at least I get the exact same temperatures.
Somethings definitely wrong somewhere for you, I have comparable ambient temperatures, though on a i975x chip set but I never get temps over 70 - and that's with my fans under volted to the point where I almost can't hear them over the hdd-hum.

What kind of case do you have?

 

[kenner]

i have 37-40C idle and 60-63C FL dual prime with my E6600 oc`ed at 3ghz, with everything at stock. intel hsf ~1700rpm with AS5. how did u install that zalman?