- Jun 27, 2006
- 30
- 0
- 0
Hey everyone
Im new to this forum, seems like a great place for computer help/advice with a lot of knowleadgable members!
Well, like a lot of you (From what I can tell) I am planning to build a new high-end PC based around Conroe. I just need some help or advice on my current plan of parts to install before I go ahead and get building.
This is what I currently am planning on:
Intel Conroe 2.4 Ghz @ 4.0 Ghz
2 GB's Corsair XMS2 DDR2 1066 RAM
150 Gb Raptor SATA
120 Gb Seagate 7200.7 HD SATA
(2) Lite-On Lite Scribe DVD R/W
600W Enermax Noisetaker PSU (SLi Ready)
Klipsch 2.1 Promedia
Logitech G5 Mouse
Logitech G15 Keyboard
Dell 2001FP 20.1" LCD Monitor
Creative Audigy X-Fi Card with external PCI module
VOYEURMODS.COM Lian Li Quad V2000 Water Cooling Ready Case with Switftech Universal CPU Block and Dual SLi MC60 Blocks with Ramsinks (to keep temps low and overclock Conreo 2.4 to 4.0 Ghz)
Now for the main parts - GPU and MOBO
I was thinking of going some 965 based chipset like the Asus one, and going with ATI X1900XTX Crossfire setup -OR- one Nvidia 7950GX2 (which is better for this one?)
beacuse Nvidia has stated no SLi support for Intel based chipsets.
Now I realy wanted dual 7900 GTX SLi, but I would have to wait for some Nforce 590 boards to come out, and when will that be?
And between Intel and Nvidia chipsets that I mentioned above, which will be the better base for overclocking of my Conroe? Just need suggestions with the GPU/Mobo combo. I also am leaning against the 7950GX2 because I cannot find a way to fit a watercooler on both cards, since one is stacked right on top of another and you cannot pull them apart to take off the cooler and put it a water block..
Sorry for the long post, but any and all advice/help/opinions is and will be greatly appreciated.
Im new to this forum, seems like a great place for computer help/advice with a lot of knowleadgable members!
Well, like a lot of you (From what I can tell) I am planning to build a new high-end PC based around Conroe. I just need some help or advice on my current plan of parts to install before I go ahead and get building.
This is what I currently am planning on:
Intel Conroe 2.4 Ghz @ 4.0 Ghz
2 GB's Corsair XMS2 DDR2 1066 RAM
150 Gb Raptor SATA
120 Gb Seagate 7200.7 HD SATA
(2) Lite-On Lite Scribe DVD R/W
600W Enermax Noisetaker PSU (SLi Ready)
Klipsch 2.1 Promedia
Logitech G5 Mouse
Logitech G15 Keyboard
Dell 2001FP 20.1" LCD Monitor
Creative Audigy X-Fi Card with external PCI module
VOYEURMODS.COM Lian Li Quad V2000 Water Cooling Ready Case with Switftech Universal CPU Block and Dual SLi MC60 Blocks with Ramsinks (to keep temps low and overclock Conreo 2.4 to 4.0 Ghz)
Now for the main parts - GPU and MOBO
I was thinking of going some 965 based chipset like the Asus one, and going with ATI X1900XTX Crossfire setup -OR- one Nvidia 7950GX2 (which is better for this one?)
beacuse Nvidia has stated no SLi support for Intel based chipsets.
Now I realy wanted dual 7900 GTX SLi, but I would have to wait for some Nforce 590 boards to come out, and when will that be?
And between Intel and Nvidia chipsets that I mentioned above, which will be the better base for overclocking of my Conroe? Just need suggestions with the GPU/Mobo combo. I also am leaning against the 7950GX2 because I cannot find a way to fit a watercooler on both cards, since one is stacked right on top of another and you cannot pull them apart to take off the cooler and put it a water block..
Sorry for the long post, but any and all advice/help/opinions is and will be greatly appreciated.