• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

brag with your crackrack!

P

Postman

Senior member
Gentlemen, start your replies! Remember, only true dedicated crackracks allowed!

My closet contains currently 4 machine system, which has 2x466 Celeron Debian server and 3 diskless nodes connected via etherboot: Duron 1GHz@1.1GHz, Celeron 566@952 and P3-700@933.

I'm running rc5 and eccp in it, full output for rc5 is somewhere around 12Mk/s, and 300-350 DP's on eccp 🙂
 
Does a single node count? I've got one P200-MMX sitting next to my main machine, running SETI and rc5 under KLinux. I haven't figured out how to network it yet (can a Win98 machine serve a Linux machine?) so I'm sneakernetting all WUs.
 
I have two running now, awaiting repairs on two more (so they don't count).

In my metal filing cabinets at works, I have a dual C-300a/450 Tyan Tiger (an original Warpcore board), and a dual C-266 running. The first one runs Win2k and is the RC5/OGR proxy server for the other board(s). They run Klinux from boot floppies. Neither board has a case. They sit inside a box, insulated by a layer of newspaper. I have a 24 port hub dedicated to it, so capacity can keep increasing.

The setup runs OGR until it runs out, then switches to RC5. I sneakernet blocks to them since they are at work and I am not allowed to connect them to our company LAN. So I use the office space and electricity. 🙂

I need to replace a ruptured capacitor on a KT7a-pro board and get it up an running. I suppose I'll get a Duron for it.

ps, if you have a working mb/processor/ps/ram that just needs a home and power, I can add it here. I'll stencil your name above it!

The big spikes in my OGR stats clearly show when I get around to updating the PProxy.

My OGR-25 history showing very spiky behavior (like ViRge's hair)
 
all running seti in the same rack 2x5x6 foot rolling rack:
tiger mp (2) XP1800 (1 cpu died this morning)
cusl2-c p3 1000@1100
(3) 8KHA+ XP1800
K7S5A XP1800
finally moved my sony wega tv off of my rack and put a video blaster in K7S5A

in the other rooms for wife and son I am selling (2) cusl2-c p3-667's
and will move 2 of the 8kha+ out of my sauna so they have new machines

need to RMA 2 cur-dls and get them back online
 
Okay at work I have 3 nodes configured this way right now:

ECS K7S5a
128MB DDR SDRAM
AMD Athlon XP 1800+
Used 3.2GB Hard Drives (didn't have the time yet to figure out diskless 🙂 )

Running Seti for a total of 18-21 WUs per day. I am planning on adding 4 more nodes by the end of June 🙂
 
I will take pics this weekend as this room is a huge mess. I am sure you can live with these tho...


room #1
room #2
room #3

I have "quite a few" computers unning here 😛 I will clean up this weekend and post some nice pics.
 


<< I will take pics this weekend as this room is a huge mess. I am sure you can live with these tho...


room #1
room #2
room #3

I have "quite a few" computers unning here 😛 I will clean up this weekend and post some nice pics. >>



mmmmm oreos 😉 sweet rack.....must be warm in there...
 


<<

<< I will take pics this weekend as this room is a huge mess. I am sure you can live with these tho...


room #1
room #2
room #3

I have "quite a few" computers unning here 😛 I will clean up this weekend and post some nice pics. >>



mmmmm oreos 😉 sweet rack.....must be warm in there... >>



120 Degrees+
 
will if I could afford a router with more ports I would have more machines, I have 4 machines 1 athalon 1.2----2 duron 1.2--- and my server a celron 533 all doing seti.
Bleep
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top