I get a bluescreen everytime I shutdown or restart my computer. I installed XP Professional about a month ago and about 2 or 3 weeks ago it began doing this. Here are my computer specs:
ABIT KT7-RAID
AMD 1ghz Thunderbird
768mb pc100
Voodoo5 AGP
2 IBM HDs
TDK 16x Burner
Pioneer 16x DVD
Linksys LNE100TX
SBLive MP3
Microtech ZIO Smartmedia Reader
Here is the error:
<< A problem has been detected and Windows has been shut down to prevent damage
to your computer.
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow these
steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart your
computer, press F8 to selected Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000009F (0x00000002, 0x82F6EE10, 0x82FEBA38, 0x82FA8A08) >>
That last part probably isn't any help, but I figured I'd post it anyway.
The only thing I could think of is that I have the Voodoo5 and there are no drivers for XP, so I had to use some hacked 2k drivers. It worked fine for a while, but maybe I installed a different set that messed everything up. I have tried resorting to the XP default drivers and also some other ones, but I can't get rid of the blue screen. I also took out the Voodoo5 and put in a junky AGP card, but that didn't help either. Anyone know? This is driving me crazy.
ABIT KT7-RAID
AMD 1ghz Thunderbird
768mb pc100
Voodoo5 AGP
2 IBM HDs
TDK 16x Burner
Pioneer 16x DVD
Linksys LNE100TX
SBLive MP3
Microtech ZIO Smartmedia Reader
Here is the error:
<< A problem has been detected and Windows has been shut down to prevent damage
to your computer.
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow these
steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart your
computer, press F8 to selected Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000009F (0x00000002, 0x82F6EE10, 0x82FEBA38, 0x82FA8A08) >>
That last part probably isn't any help, but I figured I'd post it anyway.
The only thing I could think of is that I have the Voodoo5 and there are no drivers for XP, so I had to use some hacked 2k drivers. It worked fine for a while, but maybe I installed a different set that messed everything up. I have tried resorting to the XP default drivers and also some other ones, but I can't get rid of the blue screen. I also took out the Voodoo5 and put in a junky AGP card, but that didn't help either. Anyone know? This is driving me crazy.