Biostar m7vkd NEED HELP GETTIN XP1500+ TO 1.33 GHZ

[xdcbox]

i have a xp1500+ factory unlocked cpu, its running at 1.1 ghz at 137 FSB (max in BIOS), i cant find the clock multiplier in the BIOS and i flashed the BIOS which didnt help.. anyway, i downloaded SpeedFan 4.05 which can change my FSB higher than 137, only problem is i dont know what setting i should enter, my choices are

Clock Generator :

ICS 9148B-04
ICS 9248 (ABC)F-199
ICS 9248-90
ICS 9250-18
ICS 94225
PhaseLink 205-03

any help will be appreciated, im on aim/yahoo/msn messenger also

My Motherboard/BIOS/etc
http://www.biostar-sw.com/products/mainboard/socket_a/m7vkd/

 

[xdcbox]

the only thing i need to know is how to i change the clock multiplier? i want it at 10X133= 1.33 GHZ, if anyone else has this mobo plz help me out, i cant find it in the bios so do i need to set the jumper or anything like that in the mobo?

 

[jonnyGURU]

That board has no multiplier settings.

Only front side bus settings and these settings are done with jumpers on the board (JCLK1 and JCLK2). The settings in the BIOS are only for finite overclocking (1 MHz incriments).

 

[jonnyGURU]

I think I know your problem....

You ARE at an 10X multipler, and you don't know it. The problme is that you are at a 117 MHz FSB and not 137.

Make sure the JCLK1 jumpers are set to ON OFF ON OFF (that's going from the battery down) and that the JCLK2 jumper is set to OFF.