• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Biostar M7VKD Motherboard 133mhz

E

Electric Amish

Elite Member
I can't for the life of me get this thing to run at 133mhz.

I had this old mobo sitting around and decided to use it for an upgrade for my SIL. I got an Athlon XP 1800+ and all I can get it to do is 1150mhz (100mhz x 11.5).

It supposedly has auto-detect on the CPU, but either it's not working or there's some setting in the BIOS that I'm missing. When I manually jumper it to run at 133mhz, it won't even boot. Everything spins up, but I get no video, no post, and no beep.

Anyone have any ideas??

I did install the latest bios as well.
 
Originally posted by: Bleep
When I manually jumper it to run at 133mhz
Click to expand...
Did you change both jumpers?
Click to expand...

There's a bank of 4 jumpers and a single jumper.

I tried just the single jumper with bank of jumpers all OFF = no post
I tried the bank of jumpers with single jumper ON= no post
I tried the bank of jumpers with single jumper OFF = no post

The only way it would post is the bank of jumpers all OFF and the single jumper ON.
 
per m7vkd manual..(which of course does not mean it'll work lol)
cpu clock selection
jclk1: cpu clock.......pin1-2..........pin 3-4.......pin 5-6......pin7-8
..............100mhz.........off...............off...............off.............off
..............133mhz.........on...............off................on............off

jclk2:
cpu clock
............100mhz...............on
.............133mhz..............off

and if that does work for ya please pm me!!! I have that same board and want to upgrade it!!!!!
pm me with whatever solution DOES work...thx
 
Originally posted by: NuTechNot
per m7vkd manual..(which of course does not mean it'll work lol)
cpu clock selection
jclk1: cpu clock.......pin1-2..........pin 3-4.......pin 5-6......pin7-8
..............100mhz.........off...............off...............off.............off
..............133mhz.........on...............off................on............off

jclk2:
cpu clock
............100mhz...............on
.............133mhz..............off

and if that does work for ya please pm me!!! I have that same board and want to upgrade it!!!!!
pm me with whatever solution DOES work...thx
Click to expand...

Yeah, I downloaded the manual from Biostar and tried exactly what you've shown. Everything would powerup, but I didn't get any video or post...
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top