"BIOS not installed"

helpmeout

Senior member
Sep 24, 2001
540
0
0
I have a P4P800-E Deluxe mobo, a SATA hard drive (C:), and an IDE drive connected to a Promise card. My CDROM and burner are connected to IDE 1 and 2. XP Home, SP2 with all updates installed. I built this computer a little over a year ago, and it has been problem free. Last night I had a fan noise, so opened the box and removed a case fan to clean it since noise appeared to be coming from there. I left the fan out of the case and booted the computer. Left it running about ten minutes and the noise began again. Was able to see the problem then-- a power connector intermittently touching CPU fan. Tied that out of the way and put case fan back in and closed it up. When I reconnected hardware and booted the computer, I got the following message:

No drive attached to Fast Track Controller. Bios not installed.

After Windows loaded, I got a New Hardware Found Screen for RAID Controller. I cancelled and Windows runs fine. In Device Manager I have other Devices: Raid Controller with yellow question mark. No problems whatsoever showing in Event Viewer.

The Bios is not seeing my HD drive connected to the Promise card, but all drives are seen in Windows.

Since my drive is seen in Windows, it seems the Promise card must be OK. Does anyone have any ideas? I don't understand what could have changed. BTW, I didn't unplug anything when I had the case opened.

Sorry this is so long. Thanks for any help.
 

CraigRT

Lifer
Jun 16, 2000
31,440
5
0
Why not try uninstalling and just re-installing promise drivers?

See if that changes the ! mark...
 

helpmeout

Senior member
Sep 24, 2001
540
0
0
Craig-- Thanks for the reply. That was my first thought, however in Device Manager under "SCSI and RAID controllers", the Promise card shows as properly installed. The HD attached to it is fully accessable. My guess is some setting has changed in the BIOS, and I have no idea what or why. I haven't looked at the BIOS since building this thing. When I got it all set up a year ago, I "print-screened" all BIOS pages, but I'm afraid they got thrown out. I was also thinking of reverting the BIOS back to its Default, but I'm afraid I might be in worse trouble then, and not be able to get into Windows.