BIOS flash question.

[ArnoldLLerch]

Just installed a new Matsonic MS8127C motherboard. There is recent BIOS update that is newer, by far, then the manufacture date on the board. I made a system floppy, downloaded the flash utility and the .bin file, copied them to the floppy and rebooted (with BIOS flash disabled on the jumper). Evertything works perfect on the dry run so I am assuming it will work when I switch the jumper to enable and run it. The question is; The first screen I come to, after running the executable from the A:\ prompt gives me the option/command to fill in the following space: Filename to Program:__________________ What filename?

 

[LuciferHaze]

It wants the .bin file. Type that in.

 

[ArnoldLLerch]

Thanks!