It will not do anything in 3d, period....hard locks during install of 3dmark2k1, when i ran a games gfx setup progy, hard lock, when you run dxdiag, it locks up.
Listing of what the heck went on...
1. Bought the ti200 for a temp until dell ships my 8500
2. Took out Radeon, through in the ti200
3. Uninstalled the radeon drivers, installed the detxp 21.83 drivers.
4. ran dxdiag, pc locked, bluescreened, then greeted me with a POST
5. ran a few other games, pc locked, and restated after bluescreening
6. tried 21.81, still dies
7. tried 21.88, still dies
8. tried 22.80(beta) still dies
6. Firgured it was the OS and the old radeon drivers, so i nix'd that install and reinstalled.
7. reinstalled fresh, installed the 21.81s, and surprise, surprise, the same stuff all over again. BTW, dxdiag is giving me the "driect Draw failed to run error" and prompts me if i want to run it again, if i run/test drect draw, it locks, then restarts.
So to recap, i've got a gf3 ti200 that runs 2d windows real nice, but can't run a 3d app worth a hill o' beans. So Ideas?
EDIT: the exact message dxdiag gives me is this...
"DxDiag has dectected that there may be a problem accessing direct draw that last time this program was used. Would you like to bypass Direct Draw this time?"
Revelent Sys specs
PNY GF3 ti200
P3 700@853
TUSL2-C mobo
348 megs o' Mushkin memory
Sound Blaster Live 5.1 plat
O.S. Win XP 2600
EDIT 2: A copy of the MS error report..
//
// Watchdog Event Log File
//
LogType: Watchdog
Created: 2001-11-26 11:28:45
TimeZone: 360 - Central Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
//
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
//
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce3 Ti 200
HardwareID: PCI\VEN_10DE&DEV_0201&SUBSYS_85131462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0005000D 0001088C 0005000D 0001088C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 21.88
DriverFileVersion: 5.13.01.2188
DriverInternalName: nv_disp.dll
DriverLegalCopyright: Copyright © NVIDIA Corp. 1996-2001
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 21.88
DriverProductVersion: 5.13.01.2188
EDIT3: It was the overclock tuned the chip back down to 700 and all ran smothly...So here is my question, if you have a PNY, how high of an agp bus can this thing take?
Listing of what the heck went on...
1. Bought the ti200 for a temp until dell ships my 8500
2. Took out Radeon, through in the ti200
3. Uninstalled the radeon drivers, installed the detxp 21.83 drivers.
4. ran dxdiag, pc locked, bluescreened, then greeted me with a POST
5. ran a few other games, pc locked, and restated after bluescreening
6. tried 21.81, still dies
7. tried 21.88, still dies
8. tried 22.80(beta) still dies
6. Firgured it was the OS and the old radeon drivers, so i nix'd that install and reinstalled.
7. reinstalled fresh, installed the 21.81s, and surprise, surprise, the same stuff all over again. BTW, dxdiag is giving me the "driect Draw failed to run error" and prompts me if i want to run it again, if i run/test drect draw, it locks, then restarts.
So to recap, i've got a gf3 ti200 that runs 2d windows real nice, but can't run a 3d app worth a hill o' beans. So Ideas?
EDIT: the exact message dxdiag gives me is this...
"DxDiag has dectected that there may be a problem accessing direct draw that last time this program was used. Would you like to bypass Direct Draw this time?"
Revelent Sys specs
PNY GF3 ti200
P3 700@853
TUSL2-C mobo
348 megs o' Mushkin memory
Sound Blaster Live 5.1 plat
O.S. Win XP 2600
EDIT 2: A copy of the MS error report..
//
// Watchdog Event Log File
//
LogType: Watchdog
Created: 2001-11-26 11:28:45
TimeZone: 360 - Central Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
//
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
//
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce3 Ti 200
HardwareID: PCI\VEN_10DE&DEV_0201&SUBSYS_85131462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0005000D 0001088C 0005000D 0001088C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 21.88
DriverFileVersion: 5.13.01.2188
DriverInternalName: nv_disp.dll
DriverLegalCopyright: Copyright © NVIDIA Corp. 1996-2001
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 21.88
DriverProductVersion: 5.13.01.2188
EDIT3: It was the overclock tuned the chip back down to 700 and all ran smothly...So here is my question, if you have a PNY, how high of an agp bus can this thing take?
Facebook
Twitter