Big Problem with MSI 815E Pro (MS-6337).......

[Tired of the Bull]

I just tried to install the 815E Pro and it will not work. System refuses to boot. I checked the diagnostic LEDs that are on the board and they read 0010 which would indicate a RAM problem. However, I have tried three know good DIMMs with no luck (All work fine in my other two systems). I have tried both PC100 and PC133 DIMMs and I've tried them each bank with the exact same result. I have removed all other hardware and tried to boot just using the onboard video with no others cards installed and I get the same problem. My CPU is a Cel566 but I have jumper on the board set to AUTO (I also tried it set to 100 for overclocking.)
I can't find anything on MSI's web site about this type of problem.

Please Help

 

[CADbad]

Do a search on this forum for 'MSI 815E PRO'-there is an active thread regarding this board-a very helpful group.
Good Luck

 

[Tired of the Bull]

Thanks CADbad, I monitored that thread before I made my purchase but there has been no mention of my problem in there I guess I could cut-n-paste this thread in there but I thought the title would get them to read this one.