~~~BH7 and MBM5 settings And BIOS temps??~~~

[EXman]

Hey you all with BH7's you all suggested the BH7 so I got it!

I am having a problem finding out just how hot the CPU is as the BIOS says 48-51 C I do Overclock my 2.4B to 3ghz (18x167) I think this is High and I reapplied the AS2 and reseated my Zalman 5700. Still have High temps So I tried to install the Motherboard Monitor 5 and all the different settings are not working for me I keep getting the MBM5 to read 127 degrees Cel not Far...

which sensors settings do you use for Temps in MBM5.

My Chip seems to keep booting as High as I dare try it but the temps are way to high. It seems these temps are more indictative to an old T-bird not a P4....

my Zalman fan is just plugged into the mobo w/o the speedfan thing-a-majig.

 

[Tates]

I have MBM5 temps set to:

1) Windbond 2 Diode (CPU)
2) Windbond 1 (System or MB)
3) Windbond 3 (4 phase PWB)

Abit MB's read temps on the high side.

 

[EXman]

Thanks Tates

 

[LastRide]

The BH7 reads really high temps.I wanted to get one but I am passing on it.Its a good board other than the crazy temp readings.

 

[EXman]

The funny thing is that it moves so fast up and down (4 degrees) even when idle... that bugs me
Board was pretty easy to set up though.

 

[EXman]

Using the #'s that Tates gave me I am getting 42 degrees C for CPU 28 for system and 34-35 for the power supply. These are more in line with what was expected yet still a bit high. and this is at a lower speed 2889Mhz @ 1.55V was getting wary of the temps

seem ok to you all? btw thanks Tates!