bh6 -new cpu and slotket-now to do it.Advice.

[4thman]

This is the slotket,all we could get here in the north.http://www.svcompucycle.com/supsloccpuca.html
Cpu wil be here soon.(1.0 gig celery)Do we have to set the fsb to 100 mhz using softmenu?Its set to 66 for his old 433 celery.In what order should we do things?Thanks.

 

[4thman]

^^

 

[Mojonba]

Since Bh6 latest bios was before 1.0ghz celery were around your motherboard will boot up recognizing it as ~700 processor and tell you it is unworkable. You will have to load up Cpu Soft Menu II in the Bios and manually set the multiplyer to 10.x (Download the latest biso release from Abit's website so you van have more thna 8x multiplyer). The set the Fsb to 100mhz. AGPClk/CPU Clk set it to 2/3 and disable the speed error hold. Leave the rest as it is.

Be sure to download the latest bios first. If you want to overclock set the Fsb to 105,110,122 (Depending on your mobo revision) and multiplier times the bus speed should give you actual mhz. You may increase the voltage for more stability. Do not increase more than 1.85v

 

[newbiepcuser]

You might want read this threa

similar bh-6 experience