bh6/celeron 800--setup??

[perplexed]

i am trying to setup a bh6 with a 800 celeron chip and i am having no luck.it will boot on default and that sees the chip at 533 mhz.i have not messed with these old boards in so long i don't know how to set it up to clock or overclock. a set up walkthrough would be great!!thanks! jim

 

[myocardia]

Link to BH6 manual, from Abit's website. It also has the manual for version 1.1, if that's the one that you need. If you care to read what Anandtech had to say about your board, here's a link for that, too.

 

[Crashman]

You have to set the bus speed to 100MHz.

 

[Jeff H]

What Crashman said. It's seeing your 800 as a 533 because the FSB is set to 66 (66*8=528=533MHz). Set it to 100FSB and you get your 800 (100*8=800MHz). If you have trouble getting in @ 100FSB disable the Speed Error Hold in the Soft Menu II screen.