bfg gtx 260 55mm and NiBiTor.v5.0

[bloodfury]

hello am so confuse to flash my bfg gtx 260 55mm because is got many version 55mm ,65mm, 192core and some it any video port , i look some bios and all of them dont go higher of 1.12 volt , but i look on gpureview the gtx260 got amost the same Max Power Draw: of the 285 182vs183 that will be nice to have the same gpu oc clock my question is the 55mm gpu support nibitor.5.0? because i will like to jump the voltage to 1.18 like the gtx285 to reach the same gpu clock ,your time and advice is the most welcome thx

 

[AzN]

Yes you can raise the voltage from 1.12 to 1.18. But if you use vista you can't read the bios from Nibitor from your card.

What you can do is download GPU-Z and save bios to a file and use nibitor to change voltage or whatever you want and flash with Nvflash in dos. Make sure you are using latest nibitor too.

To extract the bios to a file in GPU-Z all you have to do is click next to that says "BIOS Version"...

My results for my GTX 260 55nm

Before voltage mod:
702/1458/1242

After bios volt mod:
729/1512/1242

 

[bloodfury]

oh nice is mean 5.0 support now 55mm card i will try btw i never flash in dos , ok is mean first i make back up of my original bios after i start nibitor 5.0 and i set exact mode (extra)1.18 and after i just touch nothing after i go to save file and i will flash it that file right ?

 

[AzN]

Have you flashed your card before?

Only way to flash is within dos at least with Nvidia cards far as I know of.

 

[bloodfury]

i only use winflash or atiflash for ati card and you dont need to go in dos my first time it nvidia maybe i will have no choice to learn the good old shool ms-dos

 

[AzN]

There should be directions if you search the web. I know I wrote it here somewhere in this forum.