Barton 2500+ stock HSF

[Hankysmoo]

For those that are still using the retail hsf, how well does your chip overclock and at what are the idle and load temps at stock and overclocked settings? Also, how loud is the stock fan? Thanks!

 

[IsOs]

The retail fans are much quiter than the Cooler Master fans. My temp reaches 62C @ 144 FSB X 14, 2.06GHz x 2 on a K7D Master dual cpu motherboard

 

[Jadow]

the stock HSF on my Barton got as high as 69C at 2 ghz, it idled at 50 or so. I now have a thermalright heatsink, thermaltake fan, and some AS3, running at 2.3 ghz never gets above 48, and idles around 37 or so.

 

[Coolkid]

I'm using the stock hsf with AS3, mine reaches about 60C under load at 2185mhz (11.5X190), idle around 48C. btw, im running on a A7N8X

 

[dxkj]

The barton HSF sucks.... 2.0ghz with a tbred B and its at 50C under load (thats with the case open)

 

[tnt2]

Up to 44C w/ pc2700 at 2500+ (11 X166) or 2800+ (12.5 X 166) w/ AS ceramique.

 

[VisableAssassin]

Originally posted by: Jadow
the stock HSF on my Barton got as high as 69C at 2 ghz, it idled at 50 or so. I now have a thermalright heatsink, thermaltake fan, and some AS3, running at 2.3 ghz never gets above 48, and idles around 37 or so.

69c holy jesus man !! the T-bred core (that includes the Barton since its a T-bred with extra cache) will toast when it hits 80c or 85c i forget. thats a little too close for comfort.
slap a delta screamer on the stock HS unit and you should see better temps but you wont hear much after that 🙂 unless you get a better HS or hell water....