littletemple

Golden Member
Sep 18, 2001
1,359
0
0
I have an Antec True430 and my +12v rails fluctuate quite a bit. I've seen it go anywhere from 11.30 to 12.25. This is when it's on idle. The +5v is steady at 5.08. When i run MBM5, and look at the high/low, i've seen the low at 11.19 and high at 12.4. But the average is 12.04. Should I be concern?

ALL AT DEFAULT SPEEDS
XP1700+
SLK800 W/ TT2 Cool Mod Fan
Liteon CDR/w
Liteon DVD
WD 80 GB
Blue quad led fan
3 fans that came with the Lian-Li PC65B case.
 

dxkj

Lifer
Feb 17, 2001
11,772
2
81
That type of fluxuation is "somewhat" normal, meaning I've seen it before and ignored it :p


Im not sure if its typical for a higher end ps like antec (I think it is), but some lower end PS fluctuate quite a bit more than that (that I've seen)

someone correct me if im mispoken
 

littletemple

Golden Member
Sep 18, 2001
1,359
0
0
I thought that it shouldn't fluctuate that much? I mean, goes up and down a lot, but jumps right back to around 11.96 to 12.04.
 

techfuzz

Diamond Member
Feb 11, 2001
3,107
0
76
If you're overclocking then I might be concerned with it dropping that low. But if you are not overclocking then your power supply is within the usual spec which is commonly around 10%.

techfuzz
 

littletemple

Golden Member
Sep 18, 2001
1,359
0
0
Originally posted by: techfuzz
If you're overclocking then I might be concerned with it dropping that low. But if you are not overclocking then your power supply is within the usual spec which is commonly around 10%.

techfuzz

Wouldn't it drop lower if I'm overclocking? Why would it be fine when not overclocked and not fine when overclocked?