• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Bad hard drive circuit board

From my understanding you need a controller (board) from an identical hard drive where almost every value besides date and s/n match up.
 
^ Yep it has to be 100% identical.

Someone had the same problem and the newer board has one chip different then the other and it was a no go.
 
Check the fuses and overvoltage protectors. The latter are surge protectors that short to block excessive voltages, causing the fuses to blow in the process.
 
The whole "just move the circuit board it will work" is a very old solution.

maybe 1 in 100 *might* work, but thats not likely.


on modern drives (made 2002 and later) there is adaptive data stored on the PCB that is like a fingerprint for the drive. It's function can be considered similar to a BIOS for the HDD.

Seagates will have an external ROM chip, 8 legged.

It needs to be de-soldered and re-soldered to the new board.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top