B3 replacement board was fine...

[djshortsleeve]

My system was running fine for a couple days. I just went to wake it up from sleep and it goes through a cycle where i see some power to devices but nothing for longer than a second or so. Is this a dead board?

 

[LagunaX]

If you can get into bios, enable wakeup from pci-e.

 

[djshortsleeve]

I cant get there. Pulled CMOS battery but still cycling...

 

[LagunaX]

Maybe your ram.
Turn it off (put your battery back in) and unplug your psu.
Take out a stick.
Plug in and reboot.
If it boots, great.
If not, turn off/unplug.
Put that stick back in and take out the other stick.
Reboot.
Anything?

 

[djshortsleeve]

No results there, same cycle.

 

[LagunaX]

You also hit the reset buttons on the motherboard too, huh?
Dunno - motherboard or psu then...

 

[djshortsleeve]

Reset buttons on mobo? I cleared CMOS with jumper, and pulled battery.

Its too coincidence that everything ran fine for 2 months then the new B3 board is installed and now this problem. I am RMA this mobo for a second time...