++ ATOT official NEF thread part IV ++

Page 7340 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

Red Squirrel

No Lifer
May 24, 2003
70,646
13,821
126
www.anyf.ca
I bought a radiant heater so I can heat my cement slab to warm it up so I can apply epoxy. It does not have much if any up/down adjustment, so I had to improvise...


BGkf8O0.jpg
 

Red Squirrel

No Lifer
May 24, 2003
70,646
13,821
126
www.anyf.ca
This things are voodoo magic to me. I have no idea how they work. They literally project the heat, the same way a light bulb projects light. There is no fan, and the unit itself does not get very hot, only a little warm, but surfaces that it points to get hot.

I wonder if they make blow dryer versions of these, you could melt snow off solar panels from a distance if the beam stays focused enough.
 

sdifox

No Lifer
Sep 30, 2005
100,481
17,952
126
This things are voodoo magic to me. I have no idea how they work. They literally project the heat, the same way a light bulb projects light. There is no fan, and the unit itself does not get very hot, only a little warm, but surfaces that it points to get hot.

I wonder if they make blow dryer versions of these, you could melt snow off solar panels from a distance if the beam stays focused enough.


Err whut? Older hair dryers work exactly the same way.
 

Red Squirrel

No Lifer
May 24, 2003
70,646
13,821
126
www.anyf.ca
I haven't bought much in general in a while now. My 4k monitors and monitor arms and other accessories that went around my new setup was my last major purchase. I probably should have put that money on the credit line but since it was tax return money I basically broke even there and I had been wanting to upgrade for a while anyway.

I want to change the tilt on my shed solar panels, and also run power to the house, but I don't know if I want to spend the money on that this year. Need to buy lot of hardware to make it happen and it adds up.
 

sdifox

No Lifer
Sep 30, 2005
100,481
17,952
126
Huh? Never heard of that. Blow dryers use resistive elements and a fan and don't think that design has really changed. It's the simplest form of heat.


So is your radiant heat doohickey. Hairdryer now use ceramic heating element
 

Red Squirrel

No Lifer
May 24, 2003
70,646
13,821
126
www.anyf.ca
So is your radiant heat doohickey. Hairdryer now use ceramic heating element

Think it uses some sort of quartz crystal, there is a heating element but that's not the primary source of heat otherwise the heat would just be localized to the heater. I think that's just to get the quartz hot. It's basically an infrared laser but not as directional. At least that's my understanding of it.
 

bigboxes

Lifer
Apr 6, 2002
42,322
12,420
146
This things are voodoo magic to me. I have no idea how they work. They literally project the heat, the same way a light bulb projects light. There is no fan, and the unit itself does not get very hot, only a little warm, but surfaces that it points to get hot.

I wonder if they make blow dryer versions of these, you could melt snow off solar panels from a distance if the beam stays focused enough.

How Do Radiant Heaters Work?


As the name implies, radiant heaters work by generating infrared radiation. All objects radiate energy in some form, at a rate proportional to their temperature. The infrared energy from radiant heaters travels out in the invisible, electromagnetic waves that get absorbed by the objects in their path. If you’ve ever sat in front of a campfire, you’ve experienced radiant heat.


Radiant heat differs from conduction or convention in that it’s directional and unaffected by the medium it travels through and they don’t lose heat as they travel through the air. The waves move out in a straight line until they’re absorbed by your clothes, skin, and furniture, which means they warm you up very quickly.

Taken from here: https://www.newair.com/blogs/learn/convection-heating-vs-radiant-heating
 

Red Squirrel

No Lifer
May 24, 2003
70,646
13,821
126
www.anyf.ca

Oh I knew about that part but it does not really explain the specifics.

Like it's neat how it can literally project the heat, like, to actually generate IR at those power levels without anything super advanced like a laser diode.

But yeah think it has to do with the quartz, when you heat it up, it generates IR, and since it's light, it can then bounce off the shield. You just don't see it because it's out of the visible spectrum, but this is basically a spot light. IR is special in that it actually heats things. At least that's my guess, I could look it up further, but I'm just going to go with voodoo magic. :p