Ati 9800 np bios flash?

[MX2]

Where do I start? Links?

It has already been flashed to pro status before I received but I would like to do a little research on maybe a flash back to default. I think there may be an issue with the card.

edit:

I just discovered this card in question has the Infineon ram. I also just read an article that states you cannot flash a card unless the Samsung ram is on the card. However, in my display props tab it says I am using a 9800 pro.

I would appreciate someone to shed some light on the subject

 

[MX2]

so much for getting help off these forums...sheesh

 

[kamranziadar]

Try Omega Drivers

 

[apoppin]

Originally posted by: MX2times
so much for getting help off these forums...sheesh

i guess you have never heard of "search" (5th button from "logout")

It has been asked a million times here ,. . .

The Radeon 9800 Pro To Radeon ...XT Mod Guide Rev. 5.0! Study the guide and make SURE you follow the LINKS (there are BIOSes available and generic Video Card flashing instructions also)

 

[Algere]

9800 NP's are normally displayed as 9800 Pros under Windows unless you manually install the 9800 NP drivers.

My guess, you won't be able to flash it to 9800 Pro status but it may be possible to overclock the memory up to 320 MHz (Infineon usually craps out around the 320-330 MHz range). The core OTOH should normally be able to reach 9800 Pro frequencies or beyond, YMMV.

 

[MX2]

Originally posted by: Algere
9800 NP's are normally displayed as 9800 Pros under Windows unless you manually install the 9800 NP drivers.

My guess, you won't be able to flash it to 9800 Pro status but it may be possible to overclock the memory up to 320 MHz (Infineon usually craps out around the 320-330 MHz range). The core OTOH should normally be able to reach 9800 Pro frequencies or beyond, YMMV.

I hit 420/310. Not bad I guess. Thanks for your help guys