• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

ATI 8500 All in wonder make my computer not booking up!!!

B

BoKingWen

Senior member
I had a 8500 AIW my mobo is Abit KX7-333, when I use the AIW card the mobo the computer wont boot up. It works fine on other computer.
 
Wll found something that on the ATI webiste, does anyone else had the same problem?

System may not boot with an ALL-IN-WONDER RADEON 8500 128MB installed

This issue affects the ALL-IN-WONDER RADEON 8500 128MB when used on certain motherboards.

In some instances after installing the ALL-IN-WONDER RADEON 8500 128MB, the system may emit one long beep followed by 2 short beeps when powered on. No display will be present.

The issue only affects a small number of motherboard configurations.

This symptom is related to an issue with the System BIOS used by the motherboard itself.

To correct this issue, we recommend proceeding as follows (in order of preference):

Adjust the AGP Aperture Size setting in the motherboard CMOS setup. A different graphics card will be required to enter into the CMOS setup. For most motherboards, the BIOS defaults to a 64MB Aperture Size. A larger aperture size may need to be used.
Check for an updated System BIOS which is capable of supporting the graphics card.
Contact information for a number of system manufacturers is available on the ATI website. If an updated System BIOS is not available, using a different motherboard is recommended.

I changed my setting to 128mb and 256 mb still wont boot up!!!! 🙁
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top