• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Athlon XP/Mohterboard Question.

bustone

Member
ehh, what kind of motherboards support Athlon XP processors?

would this motherboard do it?

KA266Plus:

Processor
Supports Socket A for AMD® Athlon & Duron Processors
Supports CPU Speeds from 600 MHz up to 1.2 GHz and Higher
Supports Adjustable Vcore & VIO

Chipset
ALi® MAGiK 1 Chipset
ALi® M1647 (North Bridge)
ALi® M1535D+ (South Bridge)
C-Media® CMI8378 Sound Chip

Bus Frequency
Supports DDR 266/200 MHz FSB
Bye-Bye Jumper, Iwill Smart Setting (Software CPU Frequency Setting)

System Memory
3 x 184-pin Sockets to Support a Maximum of 3 GB of DDR Memory
Supports PC2100/PC1600 (DDR266/200) DDR SDRAM
Supports 184-pin Unbuffered DIMM

On Board IDE
Dual ATA 100/66/33 IDE Channels
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120

Audio
C-Media® CMI-87383D Sound Chip
5.1 Channel Hardware Sound
SPDIF Ready On Board
32-voice HRTF-base 3D Positional Audio
Supports Microsoft® DirectSoundTM and Aureal® A3D
Supports EAX (Environmental Audio eXtension) Sound Effects

I/O Interface
1 x FDD (Floppy Port)
2 x ATA/100 IDE Ports
1 x PS/2 Keyboard (supports auto swapping)
1 x PS/2 Mouse (supports auto swapping)
1 x Parallel Ports
2 x Serial Ports
4 x USB Ports (2 x optional)
3 x Audio Ports (Line-IN/Line-OUT/MIC)
1 x Game/MIDI Port
1 x Internal IR Header
1 x SMBus Header

Expansion Slots
1 x AGP Slot (AGP 4X/2X Mode; 32-bit/66 MHz AGP Protocol)
5 x PCI 2.2 Bus Master slots

BIOS
2 Mb EEPROM with Flash Protection
"Bye-Bye Jumper" Iwill Smart Setting
PC99 Compliant
Supports Plug and Play (PnP)
Supports ACPI 1.0
Supports APM 1.2
Supports DMI 2.1

Power Management
BIOS ROM Flash Control
Fan ON/OFF Control Signal
Manually Assign PCI IRQ
Power On by LAN/Ext Modem/Int Modem/PS2 Keyboard/PS2 Mouse/RTC/PME
Resume by LAN/Ext Modem/Int Modem/PS2 Keyboard/PS2 Mouse/RTC/PME
Temperature Sensors
Voltage Monitoring

Board Size
ATX Form Factor - 305mm x 244mm
PHOTO

Special Utilities
Acrobat Reader
Audio Rack Sound Utility
Auto Run Iwill Power Installer CD with Tools and Manual
Hardware Monitoring Utility
Trend-Micro Full-function PC-Cillin Anti-Virus Program

Package Contents
1 x Iwill KA266 Motherboard
1 x User Manual
1 x Iwill Power Installer CD
2 x ATA/100 IDE Cables
1 x Floppy Cable
 
yes. in fact, i think any Athlon/Duron chipset that supports 133 MHz FSB will be able to run the Athlon XP (probably with a BIOS flash). I'm sure that the VIA KT133A would be able to handle it, so probably all the Athlon DDR chipsets would too.

but the ALi Magik 1 isn't really the best choice for an Athlon, though. Better to go with SiS 735 or better still, VIA KT266A.
 
Back
Top