Athlon XP-M 2600+ @ 2.75GHz

Toggle sidebar Toggle sidebar
M

Manzelle

Golden Member
Oct 6, 2003
1,396
0
0
I have my system running Prime95 while I am at work...currently it's running at 2.75GHz or 210x13 @ 1.925v and it was 31C when I left this evening...by the time I get back it will have ran for 9+ hours...hopefully it hasn't crapped out...

By the way, this on air...the water-cooling should be here next week...

Edit: Prime95 was still kicking after 9 hours and 13 minutes...all is well...now for the game tests...

AXP-M 2600+ @ 2.74GHz
 
M

Manzelle

Golden Member
Oct 6, 2003
1,396
0
0
Originally posted by: trexpesto
<img src="i/expressions/face-icon-small-wink.gif" border="0">
Good luck! What stepping and what water cooler are you gettin?
Click to expand...

I can't recall the exact stepping...I got the CPU from excaliberpc.com a few weeks back so it was IQYHA something...I'll check when I install the water-cooling set up...which is an Exos-Al with the CPU-300-H06 waterblock and the GPU-180-L06 waterblock...
 
M

Montrey

Member
Sep 5, 2003
31
0
0
Gotta love those cpus. I got my 2600+ mobile a few weeks ago, spent a few hours drawing up a graph of speeds vs voltages, but the best I could get it to run prime95 was 2688@1.9v. Didn't make a difference up to 2 volts, and I didn't push it further than that for lack of cooling. Not sure what stepping mine is, but it's also on an 8RDA3+ (v2.0) with 512 megs of cheap ram, with an SLK-900A and a 92mm tornado. Right now it's running great at 2400@1.575v, with the fan on 7 volts (dead quiet, unlike the hairdryer sound at 12v), idling at 39 C in a pretty warm room.
 
M

Manzelle

Golden Member
Oct 6, 2003
1,396
0
0
Yeah, they are great...stable @ 2.75GHz would be me plenty of reason to hold off upgrading to an A64 set-up any time soon...hell, I know it's stable at 2.6GHz and that also gives me more than enough reason...
 
Sylvanas

Sylvanas

Diamond Member
Jan 20, 2004
3,752
0
0
bah! i can get 2.52@ 1.85v (the highest my board supports) youve inspired me to reach 2.75. the ocz ddr booster is on my list, once i get that i hope itll be up there with yours.
 
Avalon

Avalon

Diamond Member
Jul 16, 2001
7,571
178
106
31C? At that speeds and voltage?
I think you've got a broken sensor, or you were smoking something when you checked it...
I get around 31C idle if I'm running the thing at 1000mhz with 1.4v, so...
I'm sorry...not trying to discredit you, because I'm sure you've reached those speeds, but I just can't find your temps credible.
 
M

Manzelle

Golden Member
Oct 6, 2003
1,396
0
0
Originally posted by: Avalon
31C? At that speeds and voltage?
I think you've got a broken sensor, or you were smoking something when you checked it...
I get around 31C idle if I'm running the thing at 1000mhz with 1.4v, so...
I'm sorry...not trying to discredit you, because I'm sure you've reached those speeds, but I just can't find your temps credible.
Click to expand...

It's called an AC unit about 6 inches away from the box...the temperatures are accurate...I reach about 40C load...
 
S

Stormgiant

Senior member
Oct 25, 1999
829
0
0
I've never had a AMD cpu personally, but that is one hell of a price/performance ratio.

Also, your using 1.9V on BIOS right ?
And 31C seems low...
 
D

DaNorthface

Senior member
May 20, 2004
343
0
0
I don't think it's actually 35 degrees if that's your load temp... Also, is that 2.016 volts you're putting through the CPU?
 
Zebo

Zebo

Elite Member
Jul 29, 2001
39,398
19
81
Awesome! The AX NC's can beat it but they cost $175.

You're running 2-2-2 arnt ya? Mine is a full 800 pts less at same speed....I'm already on water.
 
M

Manzelle

Golden Member
Oct 6, 2003
1,396
0
0
Originally posted by: DaNorthface
I don't think it's actually 35 degrees if that's your load temp... Also, is that 2.016 volts you're putting through the CPU?
Click to expand...

That is the VDD voltage...not the VCore...and you're right...that isn't the volt temperature...that's what it was like when I came home and after I ran the Sandra tests...
 
D

DaNorthface

Senior member
May 20, 2004
343
0
0
so what is your running temperature and what heatsink are you using? And a question about your cpu voltage, why is cpu-z reporting it's at 2.016 volts? I'm thinking something is up with your motherboard
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom