Athlon XP CPU Pin-Mod

[dml54]

Has anyone else tried This
It woked for me to change my multiplier on a board that wont let me. I want to change the voltage also but am not sure about my board and the warning on the page about the voltages

 

[rgreen83]

Should be fine if you leave the bios settings to default. I used the wire method for an older motherboard and had no problems. Also ocinside is in english if you start at the main page ocinside.de.

 

[0roo0roo]

as long as the bios doesn't allow setting, or is basically autodetect, the mod works fine in my experience.

 

[DivideBYZero]

I have hard modded my cpu to 15 using the L3's.

 

[0roo0roo]

thats harder, and permanent.

 

[dml54]

I have the cpu at 147x15 with 1.65V for 2.2Ghz. I haven't had any problems running prime95 yet (only about 2 hours so far). When I set it to 152x15 with 1.65V the computer restarts after loading xp. Does this mean I need some more voltage? I want to be in the 2.3 to 2.4 range.
My cpu is AXDA2000DUT3C / AIUHB0316MPMW / Y821197270526. Any one else seen a letter to start the last set. I've only seen numbers there.

 

[0roo0roo]

dutc is about maxed at 2.2