Ath 2100xp performance setup?

[jsfiat]

Bought the ath xp 2100+ with a MSI KT3 Ultra MB that allows me to change core voltage cpu values and agp and ddr and fsb values. Any advice on what a good performance setup would be? thanks Jack

 

[BuddyAtBzboyz]

Do you mean the rest of the parts for your system or how should you go about overclocking it. I myself am confused by your post.

 

[jsfiat]

Sorry, I would like the cpu and the front side bus and ram to run a little faster. I got away from the biggest chip I've owned was a PIII 1 gig. I was under the impression that these ahth cpu's could be o'clocked as well as the above mentioned hardware. I went into the bios and set the memory one setting higher and core voltage up one setting etc. The pc would not boot, post etc. I finally had to pull the battery on the MB. I must not be doing something right. I hope this clears up my post. again, thanks Jack

 

[BuddyAtBzboyz]

Originally posted by: jsfiat
Sorry, I would like the cpu and the front side bus and ram to run a little faster. I got away from the biggest chip I've owned was a PIII 1 gig. I was under the impression that these ahth cpu's could be o'clocked as well as the above mentioned hardware. I went into the bios and set the memory one setting higher and core voltage up one setting etc. The pc would not boot, post etc. I finally had to pull the battery on the MB. I must not be doing something right. I hope this clears up my post. again, thanks Jack

Well if you wanted some good overclocking you probably should have went with a slower speed cpu like the 1600+ to the 2000+ The 2100+ don't overclock well from what I have heard but you should still be able to get a little out of it perhaps up to 2200+ speeds. Normally I would say try upping the voltage but you tried that already. Unfortunatley I'm stumped for now.