AsusA7V Ahlon Overclocking need help with bios problem

[skewett]

I have just set the L1 bridges on an Athlon 800. When I reboot and exit to bios I only see CPU Frequency Setting and a DRAM Frequency. A friends identical machine shows a CPU Clock Multiplier as well. Interestingly his manual shows CPU Clock multiplier listed in the bios on page 58. My manual does not show this as an option.
I have altered the CPU frequency and CPUZ indicates that my processor is now running at 880MHz.
Have I successfully clocked the chip.
Why do I not get the Multiplier option in the bios. Both my bios and my friends are the same version (1005b).

Any help would be appreciated.

 

[GasX]

My A7V doesn't have a bios way to change the multiplier either. There are jumbers on the board that are very easy to set.

 

[mechBgon]

You and your friend might have different revisions of the motherboard itself.

 

[skewett]

Thanks Mwilding for the advice but I think I have a version of the mboard which allows jumper free settings or JEN Mode. My Mobo is set to allow this bios updating but I still don't have the option of setting the CPU Multiplier.

I'm really close to cleaning off and re doing the Links on L1.

Any last minute thoughts

Jim