Asus Z-170 A: Two questions

Raswan

Senior member
Jan 29, 2010
702
6
81
Getting read to pull the trigger on this new build using this Asus mobo, but I have two potential issues here to resolve.

First, the case it's going in (In Win 904plus) has 4 USB 3.0 ports on the front panel (actually side), and I understand mobos that support more than 2 ports are more rare. Below is what the newegg spec page says for this mobo. Can someone confirm I'll be able to hook up all four front USB with this one?

It says
Internal I/O connectors:
2 x USB 3.0/2.0 connectors support additional 4 USB ports (19-pin)
2 x USB 2.0/1/1 connectors support additional 4 USB ports

That means each of those X2's likely supports 2 additional USB 2.0/3.0 ports, and this is what I'd run to the front panel on my In Win 904plus, right?

Second quick question: some of the reviews I've read say connecting the I/O panel cables on this In Win 904plus are super tight, and to alleviate this get a mobo where those ports are close to the front-facing edge of the mobo and towards the bottom. I can't find a length for that cable anywhere, but I'm hoping someone here can look at the image and tell me if--at the very least--I'm going to have more trouble than with another one.
 

happy medium

Lifer
Jun 8, 2003
14,387
480
126
I have this motherboard and it enables 4 usb 2.0 and 4 usb 3.0 on the front of your case.

The USB header ports are close to the last pci-3.0 slot at the bottom corner of the board.
click on the pictures on newegg and zoom in.
http://www.newegg.com/Product/Produ...2566&cm_re=asus_z170-a-_-13-132-566-_-Product

See where the second set of wrapped wires are in the middle of the case? That'sabout where the connections are for the USB headers on this motherboard are located ,once you mount the board.

904plus_overview_excellent-thermal-solution_01.jpg
 
Last edited:

Raswan

Senior member
Jan 29, 2010
702
6
81
I have this motherboard and it enables 4 usb 2.0 and 4 usb 3.0 on the front of your case.

The USB header ports are close to the last pci-3.0 slot at the bottom corner of the board.
click on the pictures on newegg and zoom in.
http://www.newegg.com/Product/Produ...2566&cm_re=asus_z170-a-_-13-132-566-_-Product

See where the second set of wrapped wires are in the middle of the case? That'sabout where the connections are for the USB headers on this motherboard are located ,once you mount the board.

904plus_overview_excellent-thermal-solution_01.jpg

Thanks Happy. Sounds like it will work as I would like it to for this build, then!