• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

asus striker help needed

P

prophet001

Junior Member
hi, i recently put together an asus striker system with 2 8800's qx6700 and ddr2 1066 from corsair with an 850w tt toughpower psu. i was wondering about voltages. pc probe ii is showing me alarms for the southbridge voltage at 1.71v and the 1.2v ht at 1.5v. are these acceptable voltages? everything is set to auto and i have almost exactly 5v on the 5v rail and 3.3v on the 3.3v rail. only thing a little out is the 12v at 11.64v but this is acceptable i believe. anyway, i'm not sure if i'm gonna smoke my southbridge or even what the acceptable voltages should be. i think the psu is ok b/c it ran 3d mark 06 and sandra soft burn in's without any trouble. not sure what to do here. any help would be greatly appreciated.
thank you,
Preston
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top