asus striker help needed

prophet001

Junior Member
Nov 1, 2006
16
0
0
hi, i recently put together an asus striker system with 2 8800's qx6700 and ddr2 1066 from corsair with an 850w tt toughpower psu. i was wondering about voltages. pc probe ii is showing me alarms for the southbridge voltage at 1.71v and the 1.2v ht at 1.5v. are these acceptable voltages? everything is set to auto and i have almost exactly 5v on the 5v rail and 3.3v on the 3.3v rail. only thing a little out is the 12v at 11.64v but this is acceptable i believe. anyway, i'm not sure if i'm gonna smoke my southbridge or even what the acceptable voltages should be. i think the psu is ok b/c it ran 3d mark 06 and sandra soft burn in's without any trouble. not sure what to do here. any help would be greatly appreciated.
thank you,
Preston