Asus SLI Premium Problem

[freethrowtommy]

Hey guys,
Well I am trying to OC my 4400+ so I set the voltage to the max safe value in the bios of 1.4 (going off of the processor max, not the +10% right now) and according to the bios and AsusProbe, I am getting a voltage between 1.328 and 1.344. What is going on here? Is that a read problem or is that an actually undervolting that the Asus board does? It seems that even when I set it to 1.5, it is only about 1.45 or so after that?

And one more, is the HTT in the Asus boards still messed up? I can't seem to run the HTT at 250 even with a memory divider. It will go into windows and everything but error out in Prime95. Right now it is running rock solid at 220 and I want to go probably to 240. Running a memory divider is not an issue since it will be about 193 if I have to at 240.

I have the latest non-beta bios of 1005.
Any help would be awesome!
Thomas

 

[Capt Caveman]

You're not running enough voltage. The 1.3-1.4v listing is at stock. To push it to 250, you'll need to go to 1.45v or more.

Asus Probe doesn't do a good job of giving you voltage. Try CPU-Z.

 

[freethrowtommy]

They both give the exact same reading. My question was if the board was undervolting or if the reading was off base? I am guessing both programs read the same place as the bios.