Asus Probe Temperature Monitor Problems

[EJG]

I have a TBird 1.13Ghz 266FSB processor running on an Asus A7V133 motherboard. My power supply is an Enermax Whisper 330W Power Supply (EG351P-VE (FC)). The Power Supply fan monitor connector is connected to the motherboard.

Under Asus Probe V3.27.07 under fan monitor it gives me a 0 reading for Power Fan and Chassis Fan.

Any ideas?

This is my system:

AMD Athlon Thunderbird 1.13Ghz 266 FSB & 3Com 3C905TX NIC
Enermax Whisper 330W Power Supply EG351P-VE(FC)
Crucial 512M PC133 DRAM CAS2
Asus A7V133
IBM Deskstar 45GB 7200RPM
Elsa Gladiac Geforce2 GTS 32M DDR
Black Hydraulic Case w/ Panaflow L1A 8x8/black floppy & keyboard
Socket A Fan Alpha PAL6035 28.3CFM/37.0dBA
Creative Soundblaster Live X-Gamer
Socket A Fan PAL6035 28.3CFM/37.0dBA
Ricoh 9120A CDRW/DVD Combo Drive
Black Faceplate for Ricoh
ArticSilver 2 Compound

 

[Tschaft]

use Motherboard Moniter.

 

[EJG]

Thanks but that doesn't answer the question.

 

[Dulanic]

Asus Probe will not read anything under about 1800RPM... My enermax varied from 1500-1900 depending on case temp.

 

[Tschaft]

accually that does answer your question, get mbm and it will read them.

 

[max105]

good luck...i have the same problem and the MBM software still won't read the fans. i'm assuming maybe its the fan or some setting in MBM not being correct. my asus probe was really buggy too, the readings for all the fans, voltages, and temps would have spikes every now and then, causing false alarms.