ASUS Probe is beeping at me!

[bleuiko]

Hi everyone, I have a Duron 800 @ 1000Mhz with A7V133A...

I just installed Asus Probe and it started beeping away at me because of my +3.3V... I never know how the voltage things work... could someone tell me if this is dangerous to my PC health or what it means?

Here's a pix !

Notice the 3.3V is redline instead of the yellow... is that too high? If so, how do i fix it? I don't even know what it is... someone please explain! =)

Thanks all,
bleu

 

[Austin5]

If you have your voltage adjusted higher than the board recommends just disable the 3.3 monitoring. My psu unit's fan is a tick slower than what the board thinks is good so I just disabled the monitroing of it.

 

[Wind]

<< If you have your voltage adjusted higher than the board recommends just disable the 3.3 monitoring. My psu unit's fan is a tick slower than what the board thinks is good so I just disabled the monitroing of it. >>


OR change the tolerance level on the 3.3v rail from teh default 10% to 15%.